General Discussions

Photo Gallery

Feature Request

Prime

NSD (Nireeka Smart Display)

Installation Guides

Announcements

Nireeka Collector

Not a Nireeka owner

Nireeka Prime A4

I received the Torque Sensor Package today, but it did not come with any installation instructions.
Do you have any instructions or videos to help me with the installation process?

What I found when I actually did the work.
- Important: You need a 48V battery & 500w Moter.
  It doesn't seem to work with a 36V battery or 1000w Moter.

- You need some special tools.

- If you have the first frame, you will need to drill holes in the frame.

- The USB charger and IGN switch will not work.(There's a USB charger that plugs into the display, so maybe you can use it there?)

- Existing throttle will need to be replaced as well (maybe wiring will help?).

- The red and black wiring connectors from the controller may be shipped reversed, so the connectors must be removed with a single touch and the left and right sides must be replaced. (Match the connector on the bottom bracket to the color.)

- As there is no 27.5-inch setting in the display settings, it is necessary to set the display to 27 inches. (Perhaps the speed will be slightly off.)

What bottom bracket tools did you need for this installation?

Nireeka Revenant 1000

United States

How do I install the Torque Sensor Package?

I received the Torque Sensor Package today, but it did not come with any installation instructions.
Do you have any instructions or videos to help me with the installation process?

What I found when I actually did the work.
- Important: You need a 48V battery & 500w Moter.
  It ...

Post the pictures of your Nireeka ebike here.

This bike is a total piece of AWESOME! I absolutely never can get enough of riding it everywhere...

Nireeka Prime 

Nireeka Ebike Gallery

you can order a kit here or buy an adapter cable but for this kind of money should be included. I got mine on.

Headlights?

So I'm biking home tonight... and this thing shows up out of nowhere.   I now know that I can forcefully bunny-hop the Nireeka Homie in a pinch.   Emergency hopping a combined ~114kg (250lbs) was not fun, but I am not dead, and the bike took it like champ.   Almost 1000km ...

ObstacleWeb.jpg

Chassis Robustness & Emergencies

After 7 months of waiting finally I got it. So satisfying. I almost loose hope. Tomorrow I got to try it.

20221024_152313.jpg

Hi, I am interested  in purchasing a prime and wondering where you take your bike for service or any warranty work? Are there any options for service in Winnipeg. Any advise would be greatly appreciated.

ByHisaaki Kobayashi

ByYounes Shojaie

ByMichael Means